Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ethernet to RS 485 interface
- Thread starter ZapSib
- Start date
robertjo24
Industrial
Precidia Ether232 Plus- easily configurable, fairly low cost.
Cyclades TS-100 - This is a Linux based device, DIN rail mountable, very configurable, but requires a little more time to figure out.
We use both in automation control, both are reliable.
If you want something a little easier to configure quickly, I would go with the Precidia. They are distributed through BWI,
Cyclades TS-100 - This is a Linux based device, DIN rail mountable, very configurable, but requires a little more time to figure out.
We use both in automation control, both are reliable.
If you want something a little easier to configure quickly, I would go with the Precidia. They are distributed through BWI,
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question