ethernet to RS 485 interface

[ZapSib]

Hi,
I am trying to source such interface for HV (330 kV) control room.

any references you will recommand ?

thanks.

 

[robertjo24]

Precidia Ether232 Plus- easily configurable, fairly low cost.

http://www.precidia.com

Cyclades TS-100 - This is a Linux based device, DIN rail mountable, very configurable, but requires a little more time to figure out.

http://www.cyclades.com

We use both in automation control, both are reliable.

If you want something a little easier to configure quickly, I would go with the Precidia. They are distributed through BWI,

http://www.bwi.com