Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Etabs v21.01 results for RC beam minimum rebar

Status
Not open for further replies.
Kyu Kyu Lwin

Kyu Kyu Lwin

Structural
Joined
Sep 23, 2017
Messages
1
Location
MM
Dear all,

Why the etabs give minumum rebar for RC beam as 2.17%. I design 300x500(D) beam the rebar percentage is 2.17% and area is 3529mm2. I calculate as per eurocode, the minimum rebar is only 233mm2. Do I need to give any instruction to etabs for rebar percentage in software?


1732508921831.png
 

Attachments

Status
Not open for further replies.

Similar threads

B
  • Question Question
FEA results interpretation
Replies
10
Views
9K
rb1957
rb1957
B
  • Question Question
Etabs modelling of a stadium
Replies
0
Views
4K
Bishal Nepali
B
nicolas77
  • Locked
  • Question Question
Categorising this type of RC Beam
Replies
4
Views
573
nicolas77
nicolas77
E
  • Question Question
ETABS ASCE 41-17 Auto Plastic Hinges
Replies
3
Views
16K
EagerBeaver77
E
M_U
  • Locked
  • Question Question
Strain in compression rebar of doubly reinforced beams.
Replies
5
Views
5K
Celt83
Celt83

Part and Inventory Search

Sponsor

Back
Top