Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ET Pier Question

Status
Not open for further replies.
BaileyG1

BaileyG1

Structural
Aug 22, 2008
2
Our company just recently purchased the computer program ET Pier by Eriksson Technologies. One of my engineers is attempting to use the program to design a solid stem (wall) pier on piles and his having a lot of trouble. Apparently a manual is not available. Is there anyone out there that has used the program to design a wall pier and can give us any tips?

Thanks.
 
Status
Not open for further replies.

Similar threads

tmalik3156
  • Locked
  • Question
Cracks on pier cap
Replies
8
Views
1K
wiktor
wiktor
CalebA
  • Locked
  • Question
Hammerhead Pier STM - Lateral Loads
Replies
1
Views
616
Lomarandil
Lomarandil
Ron247
  • Question
Bridge Ovhg Bracket question about hanger rod connection location.
Replies
9
Views
8K
Ron247
Ron247
tmalik3156
  • Locked
  • Question
Bridge Pier Strengthening 1
Replies
7
Views
544
BridgeSmith
BridgeSmith
Bosco89
  • Locked
  • Question
How to account for the bridge skew on the pier foundation design?
Replies
1
Views
362
BridgeSmith
BridgeSmith

Part and Inventory Search

Sponsor

Back
Top Bottom