Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Estimation of Tonnage using software

Status
Not open for further replies.
ali07

ali07

Structural
Joined
Dec 6, 2007
Messages
171
Location
CA
I've designed building using software and calculate the beam, column and braces weights. I'm wondering if somebody knows how much percentage i have to add to reach exact tonnage of steel in actual.

Appreciate if someone have checked it using this method and verified.
 
Status
Not open for further replies.

Similar threads

N
  • Question Question
SAP 2000 - Center of Mass and Center of Rigidity
Replies
0
Views
5K
Neeka
N
a_urbs
  • Locked
  • Question Question
Using Section Cuts in SAP for Storey Weight
Replies
0
Views
1K
a_urbs
a_urbs
J
  • Locked
  • Question Question
Question about the definition of transfer beams in a pile cap for a pedestrian bridge foundation
Replies
0
Views
2K
jcarlosamao
J
hadsyogs
  • Locked
  • Question Question
Error 9 on SAP2000 "subscript out of range" ,help
Replies
3
Views
2K
CSIESPL INDIA
CSIESPL INDIA
reddyteja
  • Locked
  • Question Question
Open the existing or saved SAP2000 model using MATLAB
Replies
3
Views
774
rscassar
rscassar

Part and Inventory Search

Sponsor

Back
Top