Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Escape, Evacuation and Rescue

Status
Not open for further replies.

LossPEngg

Chemical
Joined
Apr 15, 2006
Messages
13
Location
GB
Everyone,

I am putting together an Escape, Evacuation and Rescue assesment for an LNG facility together. I was wondering if there is any standard I can use to find out what the criteria is for evacuation times, such that how much time are we suppose to allow for evacuation such that the Muster areas can be accordingly appointed?
What are the basic time calculation criteria? Are there any other aspects that I should consider apart from the ones below?
Alarm Systems
Escape Routes
Muster Areas
Emergency Facilities
Safety Equipment For EER Activities
Rescue
 
I would include:
"Wind Socks" - 4 (Four) one at each corner of the plant mounted high on a pole or structure.
 
Many thanks guys, I will look into it, I hope it has somehting related to evacuation times as that was manily what I was after.

Thanks (again)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top