Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Errors from using Lightweight PMI Section

Status
Not open for further replies.
cjccmc

cjccmc

Mechanical
Joined
Oct 11, 2012
Messages
111
Location
US
I haved a large assy file (NX8 and Teamcenter)and after about 3 weeks of work it developed an error that says something like "null pointer....". Or inhouse guru said it was probably because I have a Lightweight PMI Section view and those are known to generate errors.
Do others here agree with his assessment?
 
Status
Not open for further replies.

Similar threads

KKKing
  • Question Question
How to Chart Dim when using PMI dim in Sheet metal
Replies
0
Views
5K
KKKing
KKKing
SBlackBeard
  • Locked
  • Question Question
NX Journal for PMI and Location
Replies
2
Views
2K
cowski
cowski
Befuddled
  • Locked
  • Question Question
Edit UGMaster name from NX using vb.net
Replies
2
Views
1K
Befuddled
Befuddled
multicaduser
  • Locked
  • Question Question
errors in editing
Replies
6
Views
937
multicaduser
multicaduser
SDETERS
  • Locked
  • Question Question
3D PMI and MBD vs 2D Drawings
Replies
0
Views
679
SDETERS
SDETERS

Part and Inventory Search

Sponsor

Back
Top