Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Error while opening a drawing file

Status
Not open for further replies.
Sort by date Sort by votes
Try opening your drawing file with partial loading turned off or load structure only turned on. Then once you get it open do a part cleanup.
 
Upvote 0 Downvote
SDETERS
I tried both the ways, But still am getting the same Error.
 
Upvote 0 Downvote
Sounds like you need to contact GTAC.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

gurucallie
  • Locked
  • Question Question
Embed an EXcel file into NX 2027 so the file drives a model and stays with the model file
Replies
3
Views
3K
cowski
cowski
CAD2015
  • Question Question
NX 2212: Subtraction error.......
Replies
11
Views
2K
CAD2015
CAD2015
CAD2015
  • Locked
  • Question Question
Converting a PDF document to CGM file in NX.......................
Replies
2
Views
2K
CAD2015
CAD2015
swale2
  • Question Question
correct reuse file location.
Replies
4
Views
795
Toost
Toost
CAD2015
  • Locked
  • Question Question
NX - Creating a drawing from a part......
Replies
6
Views
1K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top