Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Error occur while running simulation
- Thread starter GMCobraz
- Start date
BlasMolero
Mechanical
Hello!,
Take a look to *.F06 file located in the same directory of thye NX *.prt file as well as *.sim and *.fem files. Open the *.F06 using any text editor like Notepad.exe or wordpad.exe and search the word FATAL, there you will see the description of the nx nastran error.
Best regards,
Blas.
~~~~~~~~~~~~~~~~~~~~~~
Blas Molero Hidalgo
Ingeniero Industrial
Director
IBERISA
48011 BILBAO (SPAIN)
WEB: Blog de FEMAP & NX Nastran:
Take a look to *.F06 file located in the same directory of thye NX *.prt file as well as *.sim and *.fem files. Open the *.F06 using any text editor like Notepad.exe or wordpad.exe and search the word FATAL, there you will see the description of the nx nastran error.
Best regards,
Blas.
~~~~~~~~~~~~~~~~~~~~~~
Blas Molero Hidalgo
Ingeniero Industrial
Director
IBERISA
48011 BILBAO (SPAIN)
WEB: Blog de FEMAP & NX Nastran:
- Thread starter
- #3
- Status
Similar threads
- Question
