I am sizing an equalization basin for a 0.35 mgd wwtp and have obtained the theoretical value. All the literature I have read says to increase that value by 10 to 40%. Any ideas on how one goes about determining that number? Also, at what point should we consider aeration of the basin?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
equalization basin sizing
- Thread starter umrcheme
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question