Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

EPDM Gasket material for flange connections

Status
Not open for further replies.

districtguy

Civil/Environmental
Joined
Feb 27, 2008
Messages
6
Location
US
I have recently learned that EPDM gasket and O-ring material is preferred for potable water containing chloramines. The Buna-N gasket material will somewhat deteriorate over time with chloramines. Is the EPDM considered standard for this application? Is there any down side for using this EPDM?
 
Buna-N gasket is fragile to oxidant, I think.
EPDM is somewhat a standard for various applications because it is cheap and commonplace and good mech/chemical property.

see the attached for an overview of gasket material performance.
 
 http://files.engineering.com/getfile.aspx?folder=a1bd18bc-caa2-4b15-a352-aa31aaf8a41f&file=performanceflyerREV.pdf
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top