Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Engraving with epoxy fill spec

Status
Not open for further replies.
colt4522

colt4522

Mechanical
Joined
Mar 5, 2010
Messages
10
Location
US
on a drawing I am trying to find a spec to call out a epoxy fill for letters that will be engraved. anyone have any suggestions.

Colton, CSWA
Solidworks 2009/10
Pro/E wildfire 5.0
PDM Enterprise 2009
Dell Precision T7400
 
Sort by date Sort by votes
I don't remember any epoxy specs. You can find a color hard epoxy online.
I suggest the engraving have sharp edges, not round from a ball-end mill.

Chris
SolidWorks 10 SP4.0
ctopher's home
SolidWorks Legion
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

B
  • Question Question
Perpendicularity callout with curved datum
2
Replies
23
Views
6K
greenimi
greenimi
L
  • Question Question
Y14.5-2009: Surf. Profile Control; combined with a position control
Replies
8
Views
13K
pmarc
pmarc
H
  • Question Question
Composite Position with separate requirement for pairs of features
Replies
19
Views
6K
3DDave
3DDave
tN.gineer
  • Question Question
Cylindrical feature, datum symbol placement, in line vs not in line with dimension arrow
Replies
15
Views
11K
Burunduk
Burunduk
200918
  • Locked
  • Question Question
Position with different datums for spheres
Replies
6
Views
630
200918
200918

Part and Inventory Search

Sponsor

Back
Top