Engraving with epoxy fill spec

[colt4522]

on a drawing I am trying to find a spec to call out a epoxy fill for letters that will be engraved. anyone have any suggestions.

Colton, CSWA
Solidworks 2009/10
Pro/E wildfire 5.0
PDM Enterprise 2009
Dell Precision T7400

 

[ctopher]

I don't remember any epoxy specs. You can find a color hard epoxy online.
I suggest the engraving have sharp edges, not round from a ball-end mill.

Chris
SolidWorks 10 SP4.0
ctopher's home
SolidWorks Legion