Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ENGINEERING, PROCUMENT AND CONTRUCTION COST.

Status
Not open for further replies.
motunrayo

motunrayo

Mechanical
Joined
Mar 7, 2005
Messages
4
Location
GB
Hi, i am engaged in a write-up and i will like to know the EPC cost for a 2400m dept floating and fixed offshore rig. i will also like to know the duration to complete such project and a likely EPC contractor in Americal.

i will be gratefull if i can these information.
 
Status
Not open for further replies.

Similar threads

1
  • Question Question
Dismantling Joint and Magnetic Flowmeter Installation
Replies
3
Views
9K
bimr
bimr
DBreyer
  • Question Question
ASME B31.3 302.2.4 Temperature Variation and piping flexibility
Replies
4
Views
5K
KevinNZ
KevinNZ
T
  • Question Question
Compressibility of Nitrogen Gas and Liquid Water
Replies
7
Views
5K
georgeverghese
georgeverghese
bks2000
  • Locked
  • Question Question
Jacketed Gaskets and ASME B16.20
Replies
1
Views
1K
akpipelineengr
akpipelineengr
C
  • Question Question
ID Overlap between the gasket and the raised face flange
Replies
4
Views
633
cheezypuff
C

Part and Inventory Search

Sponsor

Back
Top