Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

EN-15614-1 8.4.7. (level 2), whe

Status
Not open for further replies.
Dan2018

Dan2018

Mechanical
Joined
Nov 22, 2018
Messages
1
Location
ES
EN-15614-1

8.4.7. (level 2), when it says when impact requirements apply, the upper limit....when hardness requirements apply, the lower limit....

any opinion on from were this requirements come from?:

-material properties?

-construction code?
 
Status
Not open for further replies.

Similar threads

spray_arc
  • Locked
  • Question Question
ISO 15614 Level 2 and ISO 9606
Replies
1
Views
1K
kingnero
kingnero
spray_arc
  • Locked
  • Question Question
ISO 3834 and EN 1090 Certifications for EURCODE 3
Replies
3
Views
1K
kingnero
kingnero
IvanNX
  • Locked
  • Question Question
material name standard s355j2 or en 1.0577
Replies
2
Views
863
HTURKAK
HTURKAK
TED7
  • Locked
  • Question Question
Metric threads - ISO 965-1 and BS 3643
Replies
0
Views
1K
TED7
TED7
O.Rezzik
  • Locked
  • Question Question
Clarification for ISO 6892 Annex E - E.2.2 Longitudinal or transverse strip
Replies
0
Views
768
O.Rezzik
O.Rezzik

Part and Inventory Search

Sponsor

Back
Top