Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

EN 1092-1 - "to be specified by the purchaser"

Status
Not open for further replies.
arondelo

arondelo

Mechanical
Joined
Apr 28, 2014
Messages
7
Location
BR
Hi,

does anyone know the reason why EN 1092-1 chooses to only specifie mating dimensions for some flanges? Other dimensions, like thickness, are "to be specified by the purchaser".

Thanks.

 
Status
Not open for further replies.

Similar threads

escapadro
  • Locked
  • Question Question
PN10, 16, 40 mating flanges according to EN 1092-1
Replies
6
Views
1K
LittleInch
LittleInch
T
  • Question Question
Fatigue analysis according to EN 13445-3
Replies
1
Views
9K
TomLee777
TomLee777
bizkitgto
  • Question Question
When would piping need to be replaced due to an overpressure event where the Yield Stress was exceeded?
Replies
15
Views
10K
GD2
GD2
Piper Mike
  • Locked
  • Question Question
24" Pipe Attached Directly to 10" Fired Heater Outlet Nozzle
Replies
4
Views
459
Piper Mike
Piper Mike
Pavan Kumar
  • Locked
  • Question Question
Pressure Rating of PN25 Spiral Wound Gasket Built to EN 1514-2
Replies
2
Views
3K
Pavan Kumar
Pavan Kumar

Part and Inventory Search

Sponsor

Back
Top