EN 1092-1 Bolt length 1

[XL83NL]

Does anyone knows where in EN1092-1 the minimum required bolt length is treated?
Or is bolt lengths discussed in construction codes that reference to EN1092-1?

 

[786392]

Dear Hello/good Afternoon,

Simple google serch revealed following links; these may be useful!

http://mdmetric.com/tech/1092summ.htm

http://www.google.com.pk/search?q=E...Q&biw=1024&bih=667&sei=eTt9UILwE67S4QSSxIHwCg

http://www.steel-flange.com/CAFE71B...E-4D19-9C57-0EF78F657BF9/DN-EN1092-1-2002.pdf

http://www.samson.de/pdf_en/t00020en.pdf

http://www.hsflanges.com/En1092-1_type01_plate_flanges.html

http://www.hsflanges.com/En1092-1_type11_wn_flanges.html

http://www.vhg-group.com/en/welding-neck-flange-en-1092-1-type-11

http://www.vhg-group.com/en/welding-ring-en-1092-1-type-35

http://www.vhg-group.com/en/lapped-collar-en-1092-1-type-32

or else search via Google yourself with the code reference 'EN1092-1'

Hopefully this proves useful for you cause resolution!




Best Regards
Qalander(Chem)

 

[XL83NL]

Thanks, but your reply didnt answer my question. Im looking for bolt lengths, especially where they're specified in EN1092-1.
Perhaps EN1092-1 doesnt specify anything on that, which makes the answer a simple 'No'.
Perhaps a construction code referencing to EN1092-1 specifies bolt lentghs?

 

[TVP]

I am not sure where bolt length is discussed, but it is not in EN 1092-1. The bolt diameter and number are shown in the various tables, as is the height/thickness of the flanges, but nothing specific on bolt length.

 

[XL83NL]

TVP, so far Ive figured that out too.
Perhaps a construction code like EN 13445 (vessels) or EN 13480 (piping) will mention it.
I'll check EN 13480.