Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

en 10204

Status
Not open for further replies.

med22

Industrial
Joined
Sep 22, 2008
Messages
1
Location
GB
My company builds items from materials supplied with a 3.1 certificate from the material manufacturer. Is it permissable for us to issue a 3.1 certificate for our assemblies using the data from the material manufacturers original certiicate.
 
EN 10204 4. Inspection documents based on specific inspections., 4.1. Inspection certificate 3.1 "Type 3.1." "It shall be permissible for the manufacturer to transfer on to the inspection certificate 3.1 relevant test results obtained by specific inspection on primary or incoming products he uses, provided that the manufacturer operates traceability procedures and can provide the corresponding inspection documents required."

Nigel Armstrong
Karachaganak Petroleum
Kazakhstan
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top