Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

EN 10204 - 3.1b Test Certs

Status
Not open for further replies.
id2k51

id2k51

Industrial
Joined
Oct 12, 2003
Messages
1
Location
GB
Is it acceptable for a supplier to supply a 3.1b test cert just showing the cast/heat number or suitable control number traceable to the cast number or is it mandatory for the supplier to submit the original manufacturers mill certs showing the cast/heat number?
 
Status
Not open for further replies.

Similar threads

FrancoisY
  • Locked
  • Question Question
rated standard for HVAC relating leak test?
Replies
0
Views
2K
FrancoisY
FrancoisY
rika kose
  • Locked
  • Question Question
Installation Pressure test
Replies
5
Views
716
rika kose
rika kose
M
  • Locked
  • Question Question
Insulation material compressive strength test- Calcium Silicate (Medium Density)
Replies
8
Views
5K
rb1957
rb1957
srini1785
  • Locked
  • Question Question
VIBRATION TEST FIXTURE.
Replies
19
Views
1K
MintJulep
M
Joccob
  • Locked
  • Question Question
Simple Coefficient of Friction Calculation / Principle Behind Friction Test Machine
Replies
14
Views
1K
btrueblood
btrueblood

Part and Inventory Search

Sponsor

Back
Top