Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Element deletion

Status
Not open for further replies.
Mataqus

Mataqus

Materials
Joined
Aug 27, 2008
Messages
2
Location
TN
Hi all forum,
i'm novice in Abaqus i work on the brittle failure of alumina plate. i use *Brittle failure module. but i want to have element deleted from my model when the stress of failure is reached.
how must i do. i use Abaqus\Explicit solver.
thank you
 
Status
Not open for further replies.

Similar threads

X
  • Locked
  • Question Question
VUSDFLD Element Deletion
Replies
1
Views
1K
FEA way
FEA way
Oluwakay
  • Locked
  • Question Question
PROBLEM WITH ELEMENT DELETION
Replies
8
Views
1K
Oluwakay
Oluwakay
M
  • Question Question
Cohesive element distorted
Replies
1
Views
3K
FEA way
FEA way
otaviobarodrigues
  • Question Question
Singularities appear only when beam/pipe is inclined – PIPE31 element
Replies
3
Views
3K
otaviobarodrigues
otaviobarodrigues
Conradebeer
  • Locked
  • Question Question
Truss or Beam Element Deletion
Replies
3
Views
399
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top