Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

electronic pressure regulator

Status
Not open for further replies.

dbonfoey

Mechanical
Joined
Jan 24, 2003
Messages
1
Location
US
Hi All,

I am looking to find some sort of electronic pressure regulator. I am hoping to find something of an electronic regulator, needle valve, or e/p valve. The main goal is to find one under a 100$ as accuracy is not an issue... It is low flow, low pressure (less than 40psi) as well.

I have seen mcmaster-carr, but they want 206$ for a low flow device.

thanks!
 
I have seen a system that might work for you, depending on what substance you are regulating & pressure & volume involved. Some Porsche Turbos had what is called a frequency valve to limit the Fuel Injection frequency valve on the K Jetronic or CIS. A control unit changed the duty cycle of an injector connected to the warm up regulator and would raise or lower the control pressure.

A simple pressure switch, Op Amp comparator, with maybe a high current transistor to drive the injector, & an injector or solenoid valve would be a simple way to use electricity to bleed off excess presure. But even this could run over your $100 limit by a little.

Drew
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top