Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Electrical Routing - Components missing from formboard

Status
Not open for further replies.
SiW979

SiW979

Mechanical
Joined
Nov 16, 2007
Messages
804
Location
GB
Quick question, I have a customer who is struggling to get components to show in a formboard drawing, we soon realised he needed to sub-divide the spline paths at a clamps RCP in order for it to be included in the formboard, but there are some connectors that are also not showing in the formboard and we are at a loss as to why they are not showing? Any ideas? Many thanks in advance.

Best regards

Si

NX7.5 NX8.5 NX9 NX10 NX11 NX12 NX1847

Technical Manager- Design

 
Status
Not open for further replies.

Similar threads

CAD2015
  • Question Question
Convert components from an assembly into one single part.......
Replies
5
Views
7K
CAD2015
CAD2015
Jian Wang
  • Locked
  • Article Article
Reconstruct missing areas in a point cloud face
Replies
6
Views
4K
Jian Wang
Jian Wang
Dave W
  • Locked
  • Question Question
Electrical Routing and Deformable
Replies
1
Views
425
jerry1423
jerry1423
CAD2015
  • Question Question
NX 2212 - Sheets from curves..............
2
Replies
21
Views
8K
cowski
cowski
S
  • Question Question
Reverse Engineering Surface Modeling from STL in Siemens NX
Replies
0
Views
4K
Sennja
S

Part and Inventory Search

Sponsor

Back
Top