Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Electrial straight blade devices, receptacles, house 120V type

Status
Not open for further replies.

ksparks

Mechanical
Joined
Jul 7, 2008
Messages
3
Location
CA
What is the minimum distance between the surface and the electrical contact for a domestic house receptacle?
What is to + - alowable for a producer of electrical receptacles?
Underlaying question is "could a plug be held away from the receptacle face .004" and not impose a violation of safety?"
 
Check out Current Taps and Adapters -UL 498A
section 14 spacings.
 
I beleive it will depend on the countries you plan on shipping to. If your strictly North America Daleyfish is correct. If your talking about the EU refer to IEC 60320-1 and IEC 60320-2-2. Christopher Caserta
Sr. Regulatory Engineer
ccaserta@enorthhampton.com
Ph:904-225-0360
Fax:904-225-0340
 
where can i find the Ul standards UL 486A online. I need a download of the same.
 
UL does not give anything away. UL makes you buy from global engineering documents. We made something similar and there was another UL standard, I think it is 247? It is an appliance standard. But ultimately will depend on application to determine which standard to use.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top