Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Elastromeric bearings 1

Status
Not open for further replies.
ozziz

ozziz

Structural
Joined
Jul 20, 2005
Messages
46
Location
AU
Can anyone recommend any books or papers for the design of elastromeric bearings for bridge girders?
 
Sort by date Sort by votes
Try thread507-80259

Otherwise, do a search of this site (search posts) with elastomeric and/or bearing as the key word.


 
Upvote 0 Downvote
I have searched most of the website and nothing technical comes up. Even the supplier's information are lacking. can you recommend some website or publication?
 
Upvote 0 Downvote
As crossframe recommended, try thread507-80259. You'll probably need to get the AASHTO codes recommended there.
 
Upvote 0 Downvote
The old Precast Concrete Institute or Prestressed Concrete Institute (not sure which and can check from home) had a design manual and within the text, there was an outline of designing corbels for elastomeric bearings.

Dik
 
Upvote 0 Downvote
might try for an update of "Design of Neoprene Bearing Pads" by Dupont
best tincan
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top