Paulista
Electrical
- Feb 7, 2005
- 83
Will be grateful if someone suggests a reasonably-priced supplier for a turn-key solution for the above, to include:
1. Thermocouple sensor for installation in exhaust manifold, upstream of the turbine flange;
2. A 2' to 2 1/2 " analogue dial gauge for display on driver´s dash;
3. Wiring between sensor and dial gauge, to be between 6-12 ft (it is for a twin-engined boat application)
4. Boat´s electrical system is 12 V DC (nominal)
1. Thermocouple sensor for installation in exhaust manifold, upstream of the turbine flange;
2. A 2' to 2 1/2 " analogue dial gauge for display on driver´s dash;
3. Wiring between sensor and dial gauge, to be between 6-12 ft (it is for a twin-engined boat application)
4. Boat´s electrical system is 12 V DC (nominal)