Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Effect of Molecular Weight on Flare System Hydraulics

Status
Not open for further replies.

Sawsan311

Chemical
Joined
Jun 21, 2019
Messages
303
Location
AE
Dear All,

I am currently analyzing in details the effect of changes in gas composition on the flare system hydraulics with respect to impact on backpressure and mach number...

Do you agree that for heavier MW, the mass rate will increase for the same molar flow of relief and accordingly backpressure on relieving PSV would increase.Additionally, mach number would reduce by a factor corresponding to the increase in pressure more dominant than molecular weight increase i.e. velocity reduction by increase in backpressure by 1/P , sonic velocity is sqrt (k*P/density) so mach number is reduced by sqrt(MW)/ P

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top