Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
effect of angle on crippling stress
- Thread starter Fstress
- Start date
SWComposites
Aerospace
what angle?
crippling of what material? what cross-sectional shape?
please be much more specific.
crippling of what material? what cross-sectional shape?
please be much more specific.
W. F. McCombs addresses flange angles in his Supplement to Bruhn. I'm not sure how to acquire this strictly legitimately now that McCombs is deceased. There are a lot of .pdfs of varying quality knocking around if strict legitimacy is not an issue for you. On the other hand, a good library should be able to locate a copy. The section of interest is around about pp. 42/43.
lists it at $40. That's rather steep considering what McCombs himself was charging. It's probably worth googling about for a better deal if you want to buy (it's basically worth it if you've got Bruhn).
lists it at $40. That's rather steep considering what McCombs himself was charging. It's probably worth googling about for a better deal if you want to buy (it's basically worth it if you've got Bruhn).
- Status
Similar threads
