S
sip
Guest
Hi all,
Assome of us are using Edrawings publisher/viewer to communicate with our clients, I thought this would be of interest:
This from Tristar in answer to the question when edrawings would become compatible with WF4:
Sip, <?:namespace prefix = o ns = "urn:schemas-microsoft-com
fficeffice" /><O
></O>
<O></O>This is the answer that I received from eDrawings in regards to wildfire 4.0 compatibility. I will keep you updated if I receive any new information. <O></O>
<O></O>Regards, <O></O>
<O></O>Eli <O></O>
<O>This in response from edrawings:</O>
Dear Eli,
<O></O>After going through the case notes would like to convey that we are working to support Pro/ENGINEER Wildfire 4.0 on eDrawings for Pro/Engineer. However we have observed issues when publishing some drawing files from Pro/ENGINEER Wildfire 4.0. We have logged this issue with the software vendor since we are dependent when exporting to eDrawings file. Presently we will not be able to release the product eDrawings for Pro/Engineer with support for Pro/ENGINEER Wildfire 4.0 until the issue is resolved.<O></O>
<O></O>However since the issue occurs only with some drawing files and the same is acceptable for customers while working we can upload on our FTP server. The product will be available by February 12, 2008 for download.<O></O>
<O></O>Please let us know if we could be of further assistance.<O></O>
<O></O>Regards,<O></O>
Sudarshan Krishnan
Hope this helps some,
<O>Sip</O>
Edited by: sip
Assome of us are using Edrawings publisher/viewer to communicate with our clients, I thought this would be of interest:
This from Tristar in answer to the question when edrawings would become compatible with WF4:
Sip, <?:namespace prefix = o ns = "urn:schemas-microsoft-com
fficeffice" /><O></O><O
></O>This is the answer that I received from eDrawings in regards to wildfire 4.0 compatibility. I will keep you updated if I receive any new information. <O></O><O
></O>Regards, <O></O><O
></O>Eli <O></O><O
>This in response from edrawings:</O>Dear Eli,
<O
></O>After going through the case notes would like to convey that we are working to support Pro/ENGINEER Wildfire 4.0 on eDrawings for Pro/Engineer. However we have observed issues when publishing some drawing files from Pro/ENGINEER Wildfire 4.0. We have logged this issue with the software vendor since we are dependent when exporting to eDrawings file. Presently we will not be able to release the product eDrawings for Pro/Engineer with support for Pro/ENGINEER Wildfire 4.0 until the issue is resolved.<O></O><O
></O>However since the issue occurs only with some drawing files and the same is acceptable for customers while working we can upload on our FTP server. The product will be available by February 12, 2008 for download.<O></O><O
></O>Please let us know if we could be of further assistance.<O></O><O
></O>Regards,<O></O>Sudarshan Krishnan
Hope this helps some,
<O
>Sip</O>Edited by: sip
