Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Edrawing rendering ".dwg" wrong

Status
Not open for further replies.

mjake1966

Aerospace
Joined
Nov 13, 2007
Messages
10
Location
US
When viewing a ".dwg' drawing from the vault using Document Information some, but not all, of the dimensions are moved off of the part being dimensioned.

The original file was edited in 2D Editor and checked in fine. It also comes out of the vault and is correct. It's only when viewed with Document Information and/or the Edrawing viewer that it is messed up.

Has anyone else ever ran into this problem before?

Nvidia Quatro FX 1400
8.0 GB RAM
AMD Phenom 9850 Quad core @ 2.50Ghz
SW2010 SP4.0
Win 7 64bit
 
Hey Kellnerp,

The drawing is literally a flat 2D, no views and not in any way connected to a model. There are sections and detail views, but they were created by copy and scale type methods(old school AutoCAD style).

Also, there are several other drawings in the vault with the same format and such, but they don't have this problem?

Nvidia Quatro FX 1400
8.0 GB RAM
AMD Phenom 9850 Quad core @ 2.50Ghz
SW2010 SP4.0
Win 7 64bit
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top