Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Eccentricity in Etabs building

Status
Not open for further replies.
umeshlamichhane

umeshlamichhane

Civil/Environmental
Joined
Dec 10, 2018
Messages
13
Location
NP
Does Etabs design the building with calculated eccentricity if it arrises more than 5%(default 5% in IS code) or we have to ovewrite eccentricity if greater than 5%?
 
Sort by date Sort by votes
You have to manually change it from the default for both code equivalent static and response spectrum cases.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jmramos
  • Locked
  • Question Question
Problem with writing shells in ETABS
Replies
0
Views
2K
jmramos
jmramos
NTHI
  • Locked
  • Question Question
Etabs - Avoid load transfer to bracings
Replies
0
Views
629
NTHI
NTHI
meistersd
  • Locked
  • Question Question
Soil Structure Interaction in ETABS
Replies
0
Views
391
meistersd
meistersd
a_urbs
  • Locked
  • Question Question
Using Section Cuts in SAP for Storey Weight
Replies
0
Views
1K
a_urbs
a_urbs
J
  • Locked
  • Question Question
Question about the definition of transfer beams in a pile cap for a pedestrian bridge foundation
Replies
0
Views
2K
jcarlosamao
J

Part and Inventory Search

Sponsor

Back
Top