Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Eccentric Arbor Slitter
- Thread starter joao100
- Start date
I have a design regarding slotting of keyways parallel to the axis of the piece. Primarily developed for slotting internal keyways in piping annulus, the piece makes use of a "wolley tooth waggler" as the British would call it, simple dial gauge deflection by everyone else in the world.
The design is not "simple" per say but references components from an assembly drawing. It may not be what you are looking for, slitting is different.
The design is not shareware, you can contact the company none-the-less.
Kenneth J Hueston, PEng
Principal
Sturni-Hueston Engineering Inc
Edmonton, Alberta Canada
The design is not "simple" per say but references components from an assembly drawing. It may not be what you are looking for, slitting is different.
The design is not shareware, you can contact the company none-the-less.
Kenneth J Hueston, PEng
Principal
Sturni-Hueston Engineering Inc
Edmonton, Alberta Canada
- Status
Similar threads
- Locked
- Question
- Locked
- Question
