successwale
Electrical
Please am running an engine MWM, Whenever i want to start the engine it keeps displaying DZR TDC SENSOR ERROR FAULT,
Wht could be the causes of this error
Wht could be the causes of this error
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
DZR TDC SENSOR ERROR FAULT
- Thread starter successwale
- Start date
- Status
MikeHalloran
Mechanical
It seems self-explanatory; your Top Dead Center Sensor is not working, or not working correctly. That's where you start looking for causes.
You might get more and better responses in any of several automotive forums here, not the one dedicated to electric motors and such.
Mike Halloran
Pembroke Pines, FL, USA
You might get more and better responses in any of several automotive forums here, not the one dedicated to electric motors and such.
Mike Halloran
Pembroke Pines, FL, USA
- Moderator
- #3
And if it helps you to locate the sensor, DZR is an acronym for De-Zincification Resistant, a type of brass, often chrome plated, so it's telling you that it's the brass sensor on your cam/ crank / distributor shaft.
" We are all here on earth to help others; what on earth the others are here for I don't know." -- W. H. Auden
" We are all here on earth to help others; what on earth the others are here for I don't know." -- W. H. Auden
- Status
Similar threads
- Question
- Locked
- Question
