Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dynamic Explicit step problem

Status
Not open for further replies.

JujuSama

Materials
Joined
Mar 28, 2012
Messages
2
Location
FR
Hi,

I have a problem with my dynamic explicit model.
I can't add or modify a step in my model.
I have this message : "An Output request cannot be created
in a step where some variables are invalid".
For information my model run and have good results but I can't
add a step...

 
Try temporarily "suppressing" current step and try to add another, I have had to do this sometimes and this worked for me. Hope you solve the problem.
 
Thank you !
My problem is solved.
I have suppressed all te H-output and recreated..
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top