Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dynamic Cone Penetrometer ASTM D6951

Status
Not open for further replies.

Mazzman

Geotechnical
Joined
Aug 3, 2004
Messages
23
Location
US
Anybody know where I can rent/borrow the DCP referenced in
D6951-03 "Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications". Thanks
 
If that's the hand unit Sowers pioneered, you can buy one from Get the $40 STP399 book too as it's not a direct correlation to SPT.
 
PSlem:

Do you know where I can get the ASTM STP-399 book? I can't seem to find it on the ASTM site or the other sites that sell standards. Is it out of print or am I doing something wrong?

Thanks!
 
I bought one from Durham Geo. It's not listed anywhere. It's not actually a standard, but a Special Topic Publication (STP). It has charts for DCP to SPT in fill, residual and alluvial and points out interesting things like no point in going beyond N=12 on the DCP.

 
To PSlem:

Actually, I'm looking for a different one (there are several types and this was a subject of another thread here).

See this link:
I'm looking for the one similar to model H-4219, which is specified in D6951 (near bottom of page in link). I have one similar to the Model H4202 that we use for evaluation of foundation bearing materials. Thanks for the info on STP399; I have been looking for it, too, and it's out of print. I have Sowers' original paper, though.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top