A.I.H 1983
Chemical
I search for Technique for dying non piggable pipeline with tee and reducers.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Drying Technique for non piggable pipeline
- Thread starter A.I.H 1983
- Start date
- Status
LittleInch
Petroleum
Well you're in the wrong forum - try the pipelines one instead.
But then please add much more detail than one line.
such as:
Length of pipeline,
diameter(s) of pipeline and branches
Can it be drained of its contents?
What dryness level do you need (dewpoint)
what are you thinking of doing?
Any constraints?
some back ground on you and the project always helps get some attention
do you have lots of power available?
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
But then please add much more detail than one line.
such as:
Length of pipeline,
diameter(s) of pipeline and branches
Can it be drained of its contents?
What dryness level do you need (dewpoint)
what are you thinking of doing?
Any constraints?
some back ground on you and the project always helps get some attention
do you have lots of power available?
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Question
- Locked
- Question