Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Drying of shell and tube heat exchanger
- Thread starter bsk17
- Start date
btrueblood
Mechanical
Use hot air purge, followed by a vacuum cycle (with applied heat if possible, e.g. oven bake), repeat cycles as required until dry to requirements.
- Status
Similar threads
- Locked
- Question