Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dry Lube on sheet metal

Status
Not open for further replies.
barrney

barrney

Industrial
Joined
Jul 20, 2004
Messages
1
Location
US
We are attempting to use a dry lube on a coil line. During humid weather the pinch rolls slip so that we don't get accurate feed lengths. Any suggestions or experience with this process and lube method?
 
Sort by date Sort by votes
We put dry lube on wire. It's the very, very last step because of these types of problems. Will probably have to move lube or pinch rolls.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S
  • Question Question
Need feedback on my jig design for welding aluminum sheet metal – flatness + dimensional control is key
Replies
10
Views
14K
gtaw
gtaw
V
  • Question Question
Designing a Checking Jig for Sheet Metal Hole Positions After Bending
Replies
1
Views
7K
Burunduk
Burunduk
B
  • Question Question
Can you 12KW laser cut H-beam metal?
Replies
0
Views
7K
Bluces
B
Proizvodnja
  • Locked
  • Question Question
Sheet metal forming
Replies
6
Views
626
boyi
boyi
Allen
  • Locked
  • Question Question
Sheet Metal Box Bending DFM
Replies
6
Views
672
CWB1
CWB1

Part and Inventory Search

Sponsor

Back
Top