Drop/Impact Simulations

[cwilson]

I'm trying to figure out how to run a "drop" simulation. Where a drop different parts from different heights and see how they react with the impact to the ground. Does anybody have any tips or pointers. Thank You

 

[guliba]

My understanding is to run the drop motion in Pro/Mechanism, then output the contact force or acceleration which you needto Pro/Mechanica.


Acturally, Pro/mechanica only can handle the drop case as static analysis.

 

[Dynamica]

ck this post...I had posted a great link to a video explaining a drop test of a moeon shower head.

[url]http://www.mcadcentral.com/proe/forum/forum_posts.asp?TID=39 449&TPN=1[/url]

 

[janet986w]

ck this post...I had posted a great link to a video explaining a drop test of a moeon shower head.



[url]http://www.mcadcentral.com/proe/forum/forum_posts.asp?TID=39 449&TPN=1[/url]

Such a very amazing link!
Thanks you for the post.



Edited by: janet986w