Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Driving dimentions in draft
- Thread starter T1936
- Start date
Hi,
yes, that's possible. The option Tools --> Maintain Relationship
must be active otherwise lines will stay at the drawn length
and the are not constrained in any way.
To assist you may then also activate 'Relationship Handles'
Any driven line should be in a different color from those that
are driving. The color can be set: Format -- Style pulldown
should be Dimension select the Style from the list and then
click on 'Modify' On tab 'general' you will find the colours
dy
yes, that's possible. The option Tools --> Maintain Relationship
must be active otherwise lines will stay at the drawn length
and the are not constrained in any way.
To assist you may then also activate 'Relationship Handles'
Any driven line should be in a different color from those that
are driving. The color can be set: Format -- Style pulldown
should be Dimension select the Style from the list and then
click on 'Modify' On tab 'general' you will find the colours
dy
- Status
Similar threads
