Is there a 64-bit compatible software that determines ultimate vertical static pile capacity using FHWA methods similar to Driven 1.2? The closed thread, thread274-174559, led me to UniPile which stated that it uses the Fellenuis Unified Method. Are there any others? Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Driven 1.2 Software
- Thread starter Stoph
- Start date
motorbiketocrank
Geotechnical
We use a-pile from ensoft.
Not in the office to confirm it's running on a 64 bit system but I believe it is.
Not in the office to confirm it's running on a 64 bit system but I believe it is.
The Florida Department of Transportation and the University of Florida have developed a software called "FB-Deep" that calculates driven pile capacities based on SPT N-values (it can also calculate capacities of drilled shafts.) The software is available from the Bridge Software Institute. It costs $500, but it is well worth it. If you google around you may find the prior version called "SPT97" which is free, and it essentially gives you the same calculated values that FB-Deep does.
Rey Villa, MS, PE
Rey Villa, MS, PE
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question