Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Drift test for MLR boiler tubes

Status
Not open for further replies.
tamal1475

tamal1475

Materials
Joined
Mar 29, 2012
Messages
41
Location
IN
Is there any standard procedure to carry out Drift Test of Multi Lead Rifled (MLR) tubes? We want to check the consistancy of the internal profile of MLR tubes which is very important for boiler application.
 
Sort by date Sort by votes
In the past when we ordered multiple lead rifled boiler tubing for our boilers we requested a representative cross section and one longitudinal section - 2" length of tubing to be removed for complete dimensional analysis. I don’t recall a specific drift testing standard.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

JoshRanch
  • Question Question
Bend Test for Aluminum Bronze
Replies
0
Views
2K
JoshRanch
JoshRanch
RAJMETALLURGY
  • Question Question
Mechanical properties in heavy thick test coupons.....
Replies
4
Views
7K
SK METT
SK METT
J
  • Question Question
Charpy Testing for Eyebolts
Replies
2
Views
7K
jamspill
J
R
  • Locked
  • Question Question
Test locations in Steel Casting.
Replies
5
Views
4K
EdStainless
EdStainless
Ratheesh_n
  • Locked
  • Question Question
Corrosion test for UNS 31254 in fittings vs forged flanges.
Replies
8
Views
881
SJones
SJones

Part and Inventory Search

Sponsor

Back
Top