Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Drawing is not Creating when save a copy of Assemly

Status
Not open for further replies.

Adnan39

Mechanical
Joined
Nov 27, 2012
Messages
1
Location
AE
Hello.
Here i got a problem during working in pro E. When i save a copy of an assembly there not comes associated drawing with assembly and part therefore i ticked on copy associated drawings and i also checked there is loaded the option of rename drawing with object(both)in configuration. kindly tell me the solution.before this problem it was doing alright save copy with associated drawing.
 
The rename option only works when both the drawing & model have the same name.

If this isn't your problem, we would need more information (version/build of ProE, any PDM, etc).
 
Also, both the drawing and assembly have to be loaded in memory when you do the rename.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
 
Yeah Ben. Wow is that still an issue probably another reason PTC can use to push Windchill on it's customers.
At Least SolidWorks has tools like SolidWorks Explorer which make interrogating relationships easier. Even the Pack & Go of SolidWorks is a lot more User Friendly.


"It's not the size of the Forum that matters, It's the Quality of the Posts"

Michael Cole
Boston, MA
CSWP, CSWI, CSWTS
Follow me on !w¡#$%
@ TrajPar - @ mcSldWrx2008
= ProE = SolidWorks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top