zchurchz
Automotive
- May 3, 2016
- 3
Hi all, I think this is my first post, please be gentle.
Since switching from Catia V5 R26 2016 to R29 2019 I seem to have lost the ability to fully link or fully update part-drawing attribute links. Some of them work (name number in title block) but some of them refuse to update unless I manually check them, see that they are changed, and confirm again. Usually, this happens with part weight, volume etc... I can have a single part & drawing open, everything is updated, looks perfect, links all claim to be "STATUS OK". But there are not.
Thanks for any advice.
Since switching from Catia V5 R26 2016 to R29 2019 I seem to have lost the ability to fully link or fully update part-drawing attribute links. Some of them work (name number in title block) but some of them refuse to update unless I manually check them, see that they are changed, and confirm again. Usually, this happens with part weight, volume etc... I can have a single part & drawing open, everything is updated, looks perfect, links all claim to be "STATUS OK". But there are not.
Thanks for any advice.
