Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Draw a Chlotoid in Microstation 1
- Thread starter costicap
- Start date
-
1
- #2
Initial Degree: Sets the degree of curvature at the origin.
Final Degree: Sets the degree of curvature at the spiral's endpoint.
Also if you are using MicroStation V7 if you go to the help drop down menu and click on tracking, MicroStation will follow along with your work and try to offer suggestions, much like a tutorial.
Hope this helps.
Final Degree: Sets the degree of curvature at the spiral's endpoint.
Also if you are using MicroStation V7 if you go to the help drop down menu and click on tracking, MicroStation will follow along with your work and try to offer suggestions, much like a tutorial.
Hope this helps.
- Thread starter
- #3
- Status
Similar threads
- Question
- Question
- Locked
- Question
- Question