Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Draftsight Copy/Past problem

Status
Not open for further replies.

mikestl

Aerospace
Joined
Jun 14, 2010
Messages
20
Location
US
Has anybody come across a problem copying and pasting in Draftsight? If I copy some linework, it seems to paste something I had copied earlier and not the last thing I copied. If I switch to another draftsight file, it will then paste something else I had previously copied in that file (I really can't make sense out of what it decides to paste). I can't get it to paste what I last copied!! Extremely frustrating.

Mike
 
You may have a better response from forum1480.
Please Red Flag this one for removal after re-posting there.
 
Sorry about that. I saw one thread in this area about Draftsight and couldn't find the proper forum. Thanks. This can be deleted
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top