Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Drafting Question on view created with "View Break"

Status
Not open for further replies.
Barnon

Barnon

Mechanical
Joined
Jul 23, 2016
Messages
97
Location
US
I'm on version 1863. The Drawing below shows a couple of views created with "View Break" which by the way works VERY slick. However when I tried to create "Section View" to show whats shown in Detail D I was unable to edit the section line or the boundary of the view. Got a few propagation errors as well with some of the tries. I was able to get what I wanted with "Breakout Section Views" and "Detail View".

Just wondering if there's a setting to allow the use of "Section View" with a "View Break". I also tried a stand a alone "Section Line" with no success.

Thanks for any help.

s
Drawing_uq5uxi.jpg
 
Status
Not open for further replies.

Similar threads

Kenja824
  • Question Question
Model Items Selectable in Drafting View?
Replies
5
Views
677
Kenja824
Kenja824
H
  • Question Question
NXOpen Section view creation
Replies
6
Views
5K
Husky Dusky
H
CAD2015
  • Locked
  • Question Question
Detail View in drawing - Modifications
Replies
2
Views
2K
CAD2015
CAD2015
Asieros
  • Locked
  • Question Question
Siemens NX Drafting - Reset the "Border to Arrow Distance"
Replies
0
Views
728
Asieros
Asieros
C
  • Locked
  • Question Question
Hide features in drawing view
Replies
5
Views
4K
Rob_N
Rob_N

Part and Inventory Search

Sponsor

Back
Top