Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

double members in cold formed steel sap2000

Status
Not open for further replies.
Muhsin Abu Ali

Muhsin Abu Ali

Structural
Joined
Apr 18, 2022
Messages
3
Location
SA
Hi colleagues, i would like to use double c sections in CF steel sections.
I found Sap2000 do not offer this.
Property modifier option is there but it do not use modified values for design.
Anyone can suggest solution to manage this?
 
Status
Not open for further replies.

Similar threads

JStructsteel
  • Question Question
Cold Formed Steel naming
Replies
13
Views
3K
Brad805
Brad805
JStructsteel
  • Question Question
Cold Formed Joists
Replies
2
Views
4K
dvd
dvd
Bammer25
  • Locked
  • Question Question
Cold Formed Steel Stage
Replies
5
Views
2K
Celt83
Celt83
Rsd789
  • Locked
  • Question Question
Cold Formed Steel Shear Wall with Steel Sheathing
Replies
7
Views
4K
driftLimiter
driftLimiter
JStructsteel
  • Locked
  • Question Question
Cold formed Cee beam identification
Replies
4
Views
4K
JStructsteel
JStructsteel

Part and Inventory Search

Sponsor

Back
Top