Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Double Layer Plywood Loads
- Thread starter wasjay
- Start date
What kind of allowable loads do you want? Out-of-plane, in-plane or something else? For out-of-plane, go back to basic mechanics of materials. For in-plane, match whatever was tested. If it wasn't tested with two sheets on one side then you can't use it.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question
