Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Door Plate / Flush Type Cleanout

Status
Not open for further replies.

Ganolli

Mechanical
Joined
Apr 8, 2010
Messages
6
Hi,

I am wondering, is it possible to do a 10ft by 10ft or 8ft by 8ft flush type cleanout? Basically, instead of having a welded door plate, we would like to have one that we can bolt. Anyone knows where to start with this?

Thanks,
 
Anything is possible, but that doesn't mean it's a good idea.

First question to bat around, does the tank need to comply with API-650? If so, then no, you can't do that, 48"x48" is the maximum.

It would be vastly simpler to put in a large roof opening and lower equipment if needed.
 
Pow you are the man thanks !
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top