Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Does anyone have experience with Simulation Hot isostatic pressing HIP?

Status
Not open for further replies.
tugni925

tugni925

Mechanical
Joined
Sep 14, 2020
Messages
107
Location
NO
I need a hip model to calculate the sintering of titanium powder, this will later be used to model a more complex problem with metallurgy. Any material (models, manuals) would be very helpful.
 
Sort by date Sort by votes
There are some papers that may be useful for you, for example:
- "Densification behaviour of titanium alloy powder under hot isostatic pressing" K.T. Kim et al.
- "Simulation of Container Design for Powder Metallurgy Titanium Components Through Hot-Isostatic-Pressing" R. Guo et al.
- "Forming and Simulation of Titanium Alloy Ti-6Al-4V by Hot Isostatic Pressing" G. Bu
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Ruben Navas
  • Locked
  • Question Question
Help Needed with Hot Pressure Stamping Simulation in Abaqus
Replies
1
Views
634
FEA way
FEA way
A
  • Locked
  • Question Question
Simulation Instability: Kinetic Energy Spikes in Plastic Boat with Pneumatic Actuators
Replies
3
Views
2K
FEA way
FEA way
M
  • Question Question
Excessive Distortion in Press Hardening Simulation
Replies
1
Views
7K
FEA way
FEA way
Adil Memet
  • Question Question
Abaqus Metallurgical phase transformations simulation example running problem
Replies
6
Views
8K
Adil Memet
Adil Memet
Shahrukh_Islam
  • Question Question
What does Convergence Tolerances mean in Abaqus?
Replies
1
Views
9K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top